DJI AGRAS T50 SPREADING SYSTEM

954,92 EUR

Spreading system for the DJI Agras T50 drone, with a 75 L tank and a maximum internal load of 50 kg. It spreads dry materials with granules of 0.5–5 mm (fertilizers, seeds and others), with a recommended spreading range of 4.5–7 m. IP67 protection under stable lab conditions. It weighs 6.0 kg, including the tank and fenders.

In stock

Stock limit

Add to cart

Product Code: C33 Do you need help? 0770531656

Add to wishlist

Description
Video (1)
Reviews (0)

Specifications
Payload	up to 50 kg
Capacity	maximum 75 L
Flow Rate Up To	108 kg/min
Spreading Width	8 meters
Uniform Spreading	rotating disc with spiral channel
Low-Rate Spreading	small hopper gates for improved accuracy at low flow rates
Real-Time Weighing	sensor for monitoring the remaining payload
Fast Refilling	extended loading gate
Fast Disassembly and Cleaning	the distributor can be easily disassembled and cleaned
Package Includes
Package Contents	1 × DJI Agras T50 Spreading System

Product safety information

The DJI Agras T50 Spreading System is a spreading system for dry materials (granules of 0.5–5 mm), intended exclusively for the DJI Agras T50 drone. It has a 75 L tank, a maximum internal load of 50 kg and a weight of 6.0 kg. The ingress protection rating is IP67 under stable lab conditions and may decrease with aging and wear. It is intended for professional use only, by trained persons. It is not a toy.

Warnings:

Read the official DJI document and all safety guidance before first use.
Use the system only with the DJI Agras T50 whose firmware supports the spreading system. Do not use it with other products or for non-agricultural purposes.
Use only dry materials with a diameter of 0.5–5 mm. Other materials can reduce performance and damage the system.
Do not overload the system. Do not exceed the load limit recommended in the DJI Agras app.
Remove the Intelligent Flight Battery before installation. Check that the spinner disk will not hit cables or other parts, and do not force the system into the aircraft.
Make sure connections are correct and secure, and handle cables carefully.
Before each use, confirm that the hopper gate and the spinner disk work normally.
The system has sharp and moving parts that can cause injury. Keep a safe distance while it is spreading.
Do not disassemble parts mounted before shipping unless the DJI guide says they can be detached. Doing so affects ingress protection.
The IP67 rating can decline if the seal is deformed in a collision, the shell seal is cracked or damaged, or the waterproof covers are not secured. The warranty does not cover water damage.
Perform tare calibration before first use, otherwise weighing accuracy may suffer.
Do not open or modify the equipment, and do not use it if it is damaged.
Comply with aviation law in your country.
Keep out of reach of children.